Common Problems of Dongguan Mouth Machine

What is the power of Dongguan nesting machine?
Approximately 1.5 kilowatts
What standard was chosen for the development and planning of Dongguan nesting machines?
1. Development plan for selecting standard molds for sewing machines;
2. Exquisite and silent, with minimal wear on components and outstanding smooth system;
3. Each machine is debugged and qualified by the installation workers, and can be installed and used immediately;
4. The surface conforms to the fashion plan and has exquisite wear-resistant baking paint;
The main reason for the jumper of Dongguan nesting machine is the nesting machine needle
1. If the needle is used for a long time, the needle tip will become bald and there will be burrs when touched by hand. You can use sandcloth to quietly polish it until it is smooth and connected.
2. Is the needle position uneven? Push the needle onto the needle slot, press it with your hand, and install it not too high or too low from the needle slot.
3. If the needle hits, check if it is twisted. If it deforms, replace it with a new one.