The main methods of horizontal knitting machines

The hand cranked horizontal knitting machine has two tilted opposing needle beds, with an inverted "V" shape in appearance. The weaving of a flat knitting machine is completed by the reciprocating motion of the machine head equipped with loop forming parts on the needle bed, driving the tongue needle to move up and down in the needle slot. The flat knitting machine is actually a double needle plate tongue needle weft knitting machine, with a triangular device like a set of flat cams. The needles of the knitting needle can enter the groove of the cam, move the triangle, force the knitting needle to make regular lifting movements in the needle groove of the needle plate, and through the action of the hook and tongue, the yarn can be woven into knitted fabric. During the lifting process of the knitting needle, the coil gradually exits the hook, opens the tongue, and exits the tongue to hang on the needle rod; During the descent process of the knitting needle, the needle hook hooks onto the newly placed yarn and twists it into a coil. The original coil is then removed from the needle hook, and the new coil passes through the old coil and is connected in series with the old coil. Numerous woven and knitted coil strings are interconnected to form a knitted fabric.
The main components of the horizontal knitting machine
Rack, needle board, guide rail, faucet, flower board.
Rack: There are two hills, and two crossbeams connect the hills into a whole, which is a cast part. There are wrenches, wrench fixing screws, needle plate screws, and needle plate screw pressure springs installed on the rack.
Needle plate: The steel plate is made of high-quality steel through refined heat treatment, which has considerable wear and rust resistance. The groove holes are milled, and there are large and small pressure bars, machine needles, tofu blocks, and fixing screws.
Guide rail: The guide rail is made of castings or special steel processing, which is fastened to the frame with fixed screws. It is generally divided into two parts, front and rear, which are the tracks for the machine head to walk on. Above the rear guide rail, there is also a yarn nozzle guide rail, mainly used for the feeding nozzle to move smoothly left and right randomly or to replace the yarn nozzle.
Horizontal knitting machine faucet: The heart of the horizontal knitting machine, on which all the components of the machine head are installed. Its components include front and rear push rods, push rod coke balls and screws, push rod sliders, and bearings are installed on the sliders. The front part of the faucet is equipped with a three eye cover plate. The screw that passes through the three eyes is a needle lifting triangular pull rod, the screw in the center eye is called a live chicken heart pull rod screw, the pull rod well ring, the needle lifting triangular small wrench, the live chicken heart small wrench, and the surface of the machine head with a scale are called a scale plate. The scale plate is equipped with a small green pressure plate, and the screw in the center of the scale plate is called a screw at both ends. The lower ends of the screws at both ends are fastened to the large triangle, and a pointer is installed in the center of the screws at both ends, with a ingot screw installed on top of the pointer. A shuttle frame is installed behind the faucet, which is equipped with a swing rod and shuttle rod. A pin switch is also installed at the back of the machine head, and the main component on the machine head is the flower board.
Flower board: The flower board is the center of the horizontal knitting machine, which has a base plate seat and a inlay structure. All triangles are installed on the base plate seat. The triangles on the flower board include needle triangle, chicken heart triangle, herringbone triangle, and large triangle