Comprehensive and detailed explanation of the features of the mouthpiece machine

The looping machine is the abbreviation of the circular stitching machine, commonly known as the "looping machine", which uses sewing thread to sew the looping of a sweater. With the help of a sewing machine, the knitting of sweaters can be efficiently and quickly completed, greatly improving work efficiency.
Technical parameters of the capping machine:
Processing customization: Yes
Variety: Mouth machine
Usage: Used in sweaters and the woolen weaving industry
Automation level: semi-automatic
Applicable thickness range: thick material machine
Thread type: bending machine
Applicable location: for factory use
Effect object: Fabric
Drive mode: electric
Number of stitches: single stitch
Number of lines: Double line
Number of machine heads: single head machine
Product type: brand new
Total weight: 100 (Kg)
The threading machine has the following features:
1. Development plan using standard molds for sewing machines;
2. Exquisite and silent, with minimal wear on components and outstanding lubrication system;
3. Each machine is debugged and qualified by the installation workers, and can be installed and used immediately;
4. The appearance conforms to the fashionable plan, with exquisite wear-resistant baking paint;
5. Through ergonomic planning, the operation is more smooth
Repair instructions for sleeve machine
Firstly, it is necessary to carefully inspect and analyze the main causes of wire breakage in the threading machine. Shunqi summarizes the following points for discussion with everyone:
1. The homework started to break, which means that the mechanic stepped on the pedal and just started sewing, it broke. The reason is that the first wire clamp is too tight, leaving too short thread ends, causing the thread to detach from the needle nose, resulting in skipped stitches and thread breakage. Another issue is that the stitching is too tight, causing the thread to pass smoothly, insufficient thread volume, and thread breakage due to tearing.
2. If the thread breaks during sewing, it will be much more chaotic. First, you need to check if the needle bar is adjusted too low. Generally, when using a DP * 5 machine needle, the needle bar sleeve should be aligned with the highest reference line on the needle bar. If using a DP * 17 machine needle, the needle bar sleeve should be aligned with the second to last reference line on the needle bar. Secondly, the gap between the needle and the tip of the rotary shuttle is 0.01-0.08mm. The tip of the rotary hook should be aligned with the center of the needle, and the final adjustment is the needle guard. The gap between the needle and the rotary hook driver should be 0. If the needle and the rotary hook driver touch too much, it may also cause needle skipping or thread breakage. If the needle is too far away from the rotary shuttle drive, the shuttle tip may also wear and tear due to the dryness of the needle, resulting in broken threads.
3. A broken thread after sewing is when the machine is about to finish its work. Generally, the reason is that the bottom knife is too dull, causing it to cut continuously and be swept off by a wire scanner, resulting in a broken thread.