The main components and inspection methods of the embedded clamping machine equipment

1. Accessories of the embedding machine equipment: needle carriage needle plate and feeding tooth
The needle plate and feeding teeth of the medium speed sewing machine are double row, and the back half of the burying machine is subjected to greater force. When the operator uses a sewing machine with a reverse feeding wrench for reverse feeding operation, it is very simple to inject needles. If the appearance of a needle needle is presented, the needle plate will collapse, and it is difficult to present this appearance with a high-quality needle plate.
Inspection method: Use a screwdriver to place it into the feeding groove on the needle plate, and shake it. Carefully observe whether it is deformed under force. If it is deformed, it is considered inferior. Not only that, but it can be seen from this that the accessories of the embedded clamping machine equipment need to be selected well.
2. Accessories for embedded clamping machine equipment: presser foot
Verification method: You can use pliers to bite the presser foot and see if you can bite the mark. The hardened needle press foot cannot be bitten out by pliers.
3. Accessories for embedded clamping machine equipment: machine needle
Choose high-speed dual section, silver white, nickel plated embedded clamp machine accessories, especially machine needles. Due to the fact that most sewing enterprises use high-speed sewing machines, many sewing products are made of new waterproof materials and chemically synthesized fiber materials. Therefore, it is necessary to have high temperature resistance for the Da Lang buried clamp machine needles. Usually, chrome plated machine needles are not suitable, and even if they are available, their function will not be very good.