Buried clamp machine equipment industry

The embedding machine in the embedding machine equipment industry is a highly skilled professional sewing skill introduced from abroad. It originated in the United States, and in Chinese Mainland, it originated in Guangdong!
The embedded clamping machine is also developed and developed by foreign countries. The initially imported brand of embedded clamping machine was relatively expensive and sold for about 100000 yuan. The embedded clamping machine has also gone from being imported from abroad to being produced domestically. Because domestically developed and produced embedded clamping machines or some assembled machines have poor stability, the quality of data parts cannot withstand the test, resulting in poor service life and functions in all aspects. Currently, most of the new machines used are foreign brands, such as Japanese Zuqi brand embedded clamping machines, with a price of about 30000 yuan
With the demand of brand shopping malls, the burying machine technology has also been favored by many brand denim customers. At that time, the burying machine was a rare job with high skill content on the market, and it became outstanding in the 1990s. Its application mainly targeted the denim production industry (denim burying machines are generally used as heavy-duty burying machines). The burying process (referring to jeans) mainly includes: 1. The burying machine head refers to the cutting and splicing of the machine head and the pants body, and the burying machine head is divided into two types: (1) the burying method of the machine head covering the pants body; (2) The method of burying the body of the pants with the machine head. 2. Burying the back wave refers to the splicing of the cut pieces that have already been buried in the machine head on the left and right ends, sometimes directly burying and clamping the cut bodies on the left and right ends. During the splicing process, the left and right machine heads need to be aligned with the lines. 3. Burying the bottom wave refers to the splicing of the inner side of the front cut pieces and the inner side of the back cut pieces. During the splicing process, the small wave and the back wave need to align the lines. The above are the three most common and primary methods of burying and clamping jeans. The main characteristics of burying and clamping are fast delivery rate, high efficiency, and the line trend and effect are more beautiful than other models, giving people a cleaner and more beautiful look. A strong visual effect
The embedding machine process for branded jeans also requires strict requirements (in the standard error zone). In addition to some basic requirements such as not bursting, the trend of the line should also be maintained in a common way. The size of the wrapped straight mouth also has strict requirements, which cannot be large or small, and should be maintained in a common way. The embedding edge should not be large or small at times, even the edges of the bone should be basically the same. The alignment should be done in a standardized manner, and important joints should be coordinated and not distorted. The length of the cut after embedding (under the condition of the cut specification) should not be too long, and the embedding wire should also form a common effect according to the degree of curvature of the cut. Generally, the embedding clip cut pieces are straight, so the embedding wire should be The trend should be in a straight line and not create twists and turns. Ordinary cut pieces should not have wrinkles after being embedded, unless some fabrics that cannot be prevented will leave some wrinkles, But try to avoid making it completely wrinkle free, etc